Shenzhen Origin Electonic CO., Ltd
Shenzhen Origin Electonic CO., Ltd
Add to Cart
Global GPS Logistics Transport Vehicle Management System
| No. | Item | Specifications | Remarks |
|---|---|---|---|
| 1 | Operating Voltage | DC 9~90V | |
| 2 | Operating Current | Approx. 45mA@12V (Standby Current 8mA) | |
| 3 | Dimensions | 84mm*38mm*12mm | |
| 4 | Positioning Method | GPS/BeiDou | |
| 5 | Positioning Error | <10m (Reference data, positioning error is related to terrain, time, and other factors) | Data from company lab tests |
| 6 | Communication Network | 4G Network | |
| 7 | Communication Method | TCP/UDP | |
| 8 | Operating Temperature Range | -25℃ ~ +75℃ | |
| 9 | Storage Temperature Range | -40℃ ~ +85℃ | |
| 10 | Terminal Net Weight | 40g | |
| 11 | Backup Battery | 55mAh |
| Feature Block | Feature Details | Feature Description |
|---|---|---|
| Vehicle Remote Monitoring | Real-time Location Query | Query real-time vehicle status |
| Scheduled Monitoring | Set monitoring intervals based on customer requirements | |
| Blind Zone Data Upload | Terminal can store up to 600 blind zone data points | |
| Status (Version) Query | Platform can remotely query terminal status (version) information | |
| Mileage Setting | Set initial mileage value | |
| Remote Software Upgrade | Requires manufacturer support | |
| Vehicle Alarm Functions | Area Restriction | Supports setting up to 10 areas for entry/exit alarms |
| Overspeed Alarm | Alarm is triggered when speed exceeds the set limit | |
| Low Voltage Alarm | Alarm is triggered when main power voltage drops below 10V | |
| Main Power Loss Alarm | Alarm is triggered when main power voltage drops below 5V, supports SMS alerts | |
| Illegal Movement Alarm | Alarm is triggered if speed exceeds 5 after ACC is off for 10 seconds, supports SMS alerts | |
| Vibration (Collision) Alarm | Alarm is triggered upon abnormal vibration detection, supports SMS alerts | |
| Other Features | Turnpoint Data Upload | Immediately uploads location data when direction change exceeds the set value |
| Base Station Positioning | Locates terminal based on mobile communication base stations | |
| Low Power Mode | 3D accelerometer detects vehicle vibration. Switches to standby mode after 5 minutes of inactivity, turning off GPS module. Returns to active mode upon vibration. | |
| SMS Location Query | Send "CC" to the terminal, and it will return the current location via SMS in Chinese |
Check the device's appearance and ensure all accessories are included.
Open the device and insert the SIM card into the slot. Avoid excessive force to prevent damage. Do not insert or remove the SIM card while the device is powered on. Ensure the SIM card has internet access.
A. Waterproof: Choose a location that is not prone to water ingress to keep the terminal dry. Avoid air conditioning vents to prevent condensation inside the terminal, which can affect its lifespan.
B. Vibration Resistance: Do not install the terminal in areas with prolonged strong vibrations.
C. Interference Prevention: Keep the terminal away from in-car audio and communication devices to avoid conduction and radiation interference.
Connect the red power cable (positive) to the vehicle's constant power supply (main power positive). Connect the black power cable (negative) to the vehicle's power negative or ground, ensuring good conductivity.